KOPLAST spol. s r.o.

sídlo:
Havlíčkovo náměstí 74
679 06 Jedovnice

hlavní výrobní závod:
Pod Horkou 752
679 06 JEDOVNICE
Czech Republic

tel.: +420 513 035 221
fax: +420 513 035 220
e-mail: info@koplast.cz

VL 800

Technical parameters of VL 800
Plot size of the machine (l x w x h)	2550 x 1350 x 2100 mm
Weight of the machine	0.8 t
Type of drive	el. energy, compressed air adjusted up to 1 Mpa
Total input	15.6 kW 20A
Input of heating panel - upper	10.3 kW
Input of heating panel - lower	4.0 kW - not in standard configuration
Air pump SV 1040C	1.25 kW
System	3+N+PE, 400/230 V, 50 Hz
Inlet pressure	max. 1 Mpa
Operating pressure	max. 0.8 MPa
Temperature of plastification	max. 220 °C
Machine operation	manual/automatic
Size of work table	710 x 710 mm
Max. size of plastic	800 x 800 mm
Thickness of plastic	0.3 to 4 mm
Max. rise of table	300 mm
Regulation of heaters	digitally set, continuously adjustable, divided into 3 zones
Coverage	IP 30
Environment	normal area AB - areas with protection against atmospheric impact with regulation +5 to +40 °C
Interval of supply voltage	95 to 105 % of machine nominal voltage
Max. tolerance of frequency	(+), (-) 2%
Max. tolerance in place of operation	70 dB