KOPLAST spol. s r.o.

sídlo:
Havlíčkovo náměstí 74
679 06 Jedovnice

hlavní výrobní závod:
Pod Horkou 752
679 06 JEDOVNICE
Czech Republic

tel.: +420 513 035 221
fax: +420 513 035 220
e-mail: info@koplast.cz

VL 2000

Technical parameters of VL 2000
Plot size of the machine (l x w x h)	3000 x 2630 x 2445 mm
Weight of the machine	1.8 t
Type of drive	el. energy, compressed air adjusted up to 1 Mpa
Total input	43.0 kW 69A
Input of heating panel - upper	29.8 kW
Input of heating panel - lower	9.8 kW
Air pump SV 1040C	2.5 kW
System	3+N+PE, 400/230 V, 50 Hz
Inlet pressure	max. 1MPa
Operating pressure	max. 0.8 MPa
Temperature of plastification	max. 220 °C
Machine operation	manual/automatic
Size of work table	1910 x 910 mm (option of frame insert change)
Max. size of plastic	2000 x 1000 mm
Thickness of plastic	0.3 až 5 mm
Max. rise of table	550 mm
Regulation of heaters	digitally set, continuously adjustable, divided into 10 zones
Coverage	IP 30
Environment	normal area AB - areas with protection against atmospheric impact with regulation +5 to +40 °C
Interval of supply voltage	95 to 105 % of machine nominal voltage
Max. tolerance of frequency	(+), (-) 2 %
Max. tolerance in place of operation	70 dB