KOPLAST spol. s r.o.

sídlo:
Havlíčkovo náměstí 74
679 06 Jedovnice

hlavní výrobní závod:
Pod Horkou 752
679 06 JEDOVNICE
Czech Republic

tel.: +420 513 035 221
fax: +420 513 035 220
e-mail: info@koplast.cz

VL 1000

Technical parameters of VL 1000
Plot size of the machine (l x w x h)	2750 x 1550 x 2270 mm
Weight of the machine	1.1 t
Type of drive	el. energy, compressed air adjusted up to 1 Mpa
Total input	21.5 kW 35A
Input of heating panel - upper	14.9 kW
Input of heating panel - lower	5.0 kW - not in standard configuration
Air pump SV 1040C	1.25 kW
System	3+N+PE, 400/230 V, 50 Hz
Inlet pressure	max. 1 MPa
Operating pressure	max. 0.7 - 0.9 MPa
Temperature of plastification	max. 220 °C
Machine operation	Manual/automatic
Size of work table	910 x 910 mm (option of format change)
Max. size of plastic	1000 x 1000 mm
Thickness of plastic	0.3 to 5 mm
Max. rise of table	400 mm
Regulation of heaters	digitally set, continuously adjustable, divided into 3 zones
Coverage	IP 30
Environment	normal area AB - areas with protection against atmospheric impact with regulation +5 to +40 °C
Interval of supply voltage	95 to 105 % of machine nominal voltage
Max. tolerance of frequency	(+), (-) 2%
Max. tolerance in place of operation	70 dB